Universal Industrial Diesel Engine Electric Motor

The AW I-300 Dynamometer is the smaller industrial diesel engine / electric motor dyno in this series. Capabilities of testing up to 300hp & 1050 ft/lbs of torque.

This unit has a wet prony brake style power absorption unit, hydraulically activated & water cooled.

Every year, more buyers choose the high torque, high horsepower AW dynamometer.


Features		 AW I-300 Dynamometer
Bullet point image The I-300 can to test engines up to 300hp (225 kW) @ 3600 rpm, with a maximum torque rating of 1050 ft/lbs (1425 Nm). With max torque at 0-1000 rpm, the versatile dynamometer can check torque rise and lugging ability of high torque/low RPM engines or motors.
Bullet point image Fitted with a balanced high speed driveline kit. A universal adaptor for diesel or Timesaver adaptor for electric.
Bullet point image Protection is built-in against harmonic vibration, torque overload and thermal overload.
Bullet point image Bi-rotational - can test equally in either rotation.
Bullet point image DynoPro 2100S computer & printer (see below).
Bullet point image Calibration is an easy one man operation done on site (no need to send away).
Bullet point image Unit is portable & on wheels - can easily be floor or rail mounted.
Bullet point image The I-300 can test diesel engines, electric motors, gear boxes, transmissions and other high torque/low RPM applications. Other options permit custom-tailoring of the I-300 to your application. In addition, the I-300 can be factory equipped to test unusually high torque/low RPM equipment.
Bullet point image No noise, the only sound you will hear is that of the engine being tested!
Power Ratings
Model Max Speed 900 RPM 1200 RPM 1800 RPM 3600 RPM Max Torque
I-300 3600 RPM 20 - 175 HP
15 - 130 kW		 25 - 200 HP
18 - 150 kW		 40 - 225 HP
30 - 167 kW		 75 - 300 HP
56 - 225 kW		 1050 ft/lb
1400 Nm

Note: Minimum ratings relate to an estimate of water drag on drums

View - Power Graph & Torque Graph

NEW DynoPro 2100S Computer & Printer

Displays power, torque and torque rise with easy calibration
Displays imperial (hp ft/lbs) or metric (kW Nm) through a simple touch menu setup.

ETS software for external computer such as laptop available. 

 DynoPro 2000 Computer Sample Report
DynoPro 2100S Computer Sample Print Report
of a Full Range Power Test

Engine report similar

Optional
RTX Remote & Smart Load

Auto adjust for constant RPM / torque Set-Point ability
(Set on 2000 rpm, stays on 2000 rpm)
Real time data display
 

 RTX Remote & Smart Load

Optional
AW Engine Test System (ETS)

Computer software that enables reports,
graphs and full test data.
Connects directly from dyno's digital display to an external PC ( i.e. laptop).

Ideal for Ag or Diesel engine.

AW Engine Test System (ETS)
Optional Engine Cooling Manifold
Cooling Manifold
 Optional
Engine Cooling Manifold

Engine Cooling Manifold uses the pre-heated water from dyno or external source in replace of radiator.		 Optional Engine Stand
Engine Stand

Optional
Engine Stand

Engine Stand with bell housing mount or pad mount
(4000 kg capacity).

Optional
Electric Motor Testing Package

Bullet point image Motor test table - mobile & adjustable height - suit up to 450mm frame size.
Bullet point image Special Dyno Floor mount kit - set up to attach test table.
Bullet point image Constant Torque Kit - to 0 rpm for locked rotor test or very low rpm testing, eg: tranmissions.
Bullet point image CLControl - set point torque or rpm operated from hand held control with test display (6m lead).

More Pictures

I-Series Electric Motor Testing Package

COOLING REQUIREMENT GUIDE
Litres per Minute Required - for continuous testing

Incoming
water temp

 100HP
75kW		 200HP
 150kW		 300HP
225kW		 400HP
300kW		 500HP
375kW		 600HP
450kW		 700HP
525kW		 800HP
600kW		 900HP
675kW		 1000HP
 750kW
40oF    5oC 19 38 57 75 95 115 135 150 170 190
50oF    11oC 23 45 70 90 115 140 160 185 205 230
60oF    16oC 27 54 80 105 135 160 190 215 245 270
70oF    22oC 30 60 90 120 150 180 210 240 270 300
80oF    27oC 36 70 100 135 170 200 240 270 305 340
90oF    33oC 40 80 115 150 190 230 265 300 340 380
100oF   38oC 52 100 150 200 250 300 350 400 450 500
110oF   44oC 68 130 195 260 325 390 455 520 585 650

Please note: Due to ongoing developments specifications may change.

A.M.D.S. has full Technical Info, Parts & Service backup ensuring AW owners receive the service they deserve.
A.M.D.S. is the distributor for the Australia - New Zealand region.

PRINTABLE BROCHURE  -  CLICK HERE

Contact Information
For further details or a quote please contact
Chris Smith
Phone: (02) 6921 2011
Email: equipment@amds.com.au

© Australasian Machinery Dealer Services Pty Ltd