Only marginally longer than a solvent sink but with far greater productivity and returns.

The Prentice XM50 automatic, industrial parts washer suits a small to medium workshop where space is in short supply.

Coming in at a compact 1650mm high, 1120mm wide and 1150mm long, you’ll find that the XM50 can slot into almost any small workshop. It’s designed to reduce your downtime, increase productivity and returns, while protecting your staff’s safety. The Prentice XM50:

  • Protects against heating element damage by including a low water level sensor.
  • Affords you a longer use of your solution whilst changing it less frequently by incorporating an oil skimmer.
  • Eliminates early morning starts with an optional programmable 7 day timer. Arrive at work with your parts washer already hot and ready to go.
  • Increases water penetration using a gear drive and a slow 4-5 rpm. The XM50 doesn’t rob you of water pressure, to drive the turntable, like water driven models do.
  • Protects users by stopping the wash pump and turntable drive if the door is opened during the wash cycle, using a safety proximity switch fitted to the door.

Powered by a sturdy 1.1kW stainless steel pump, the XM50 delivers 160 litres of solution per minute at 175 kpa (or 25 psi) of working pressure.

Using our biodegradable, non-caustic, water soluble powdered degreaser and detergent, the XM50 heats your solution up to 85C and makes short work of dirty parts

Could you use a more productive workshop, a greater volume of work and higher returns using the Prentice XM50?

To get a quote on the XM50, click the ‘ Make Enquiry ’ button or call Malcolm on 02 6921 2011.

Prentice XM50 Parts Washer
Automotive & Light Industrial

Automatic Industrial Parts Washer – Prentice XM50 – open

Make an Enquiry

Prentice XM50 Automatic industrial parts washer
Prentice XM75 plant and industrial parts washer
Prentice XM125 heavy duty and industrial parts washer
Prentice XM150 extra heavy duty industrial parts washer

1.1kW Stainless Steel Pump

Parts Washer with 1.1kW Stainless Steel Pump

A stainless steel pump ensures you won't need to replace the pump because of rust. Pumping 160 litres per min at 25 psi working pressure, the XM50 has been designed to make cleaning light auto parts a breeze.

Stainless Steel Oil Skimmer

Stainless Steel Oil Skimmer

The stainless steel oil skimmer eases the load on your waste management system whilst increasing its longevity. Just 15 mins of use per week should suffice, twice if under a heavy workload.

Heavy Duty Castor Wheels

XM50 Heavy Duty Castor Wheels

Castor wheels have been added to make the XM50 fully mobile. Even with 190 litres on board, these wheels make moving the unit a quick and easy job.

Friction Drive

XM50 Parts Washer Friction Drive

No water drive here! The friction drive provides a slow and steady 4-5 rpm which ensures high water impact and is abrasive enough to give your light auto parts a thorough cleaning.

  • Turntable inside diameter: 750 mm
  • Job Height: 1000 mm
  • 200 kg maximum capacity
  • Medium duty steel construction
  • Friction-drive turntable system
  • 18 Stainless-steel fan nozzles
  • 1.1 kW 160L/min Stainless steel pump. at 25 psi
  • 190 Litre solution tank
  • 2 x 3.5kW Heating elements (up to 85C)
  • Low water level sensor & alarm
  • Removable parts tree
  • Small parts tray
  • Full opening gasket-free octagonal door
  • Removable tank filter screen
  • Stainless steel oil skimmer
  • Heavy duty rubber castors
  • 20 amp, 3 phase, 5 pin socket
  • Dimensions (mm) H:1650 x W:1120 x L:1150
XM50 Parts Washer with 300mm Basket extention XM50 Parts Washer with parts tree

7 Day Timer

Parts Washer programmable 7 day timer

Wake up each morning and ease your way into work day, knowing your programmable 7 day timer already has your parts washer heated and ready to go to work.

Come afternoon, program it to turn off 30 mins-1hr before close to ensure you're not wasting energy unnecessarily.

What about daylight saving you ask? It allows for that as well.

Small Parts Baskets, Tray & Tree

Small Parts Baskets, parts Tray & parts Tree for parts washer

Reduce downtime and improve productivity by making the most of your XM50's capacity with the small parts basket, tray or tree.

Small Parts Tree Dimensions:
760mm x 485mm

Small Parts Tray Dimensions:
280mm x 285mm x 75mm

Parts Basket Dimensions:

400mm x 200mm x 200mm

300mm Turntable Extention

300mm Parts Washer Turntable Extention

Reduce downtime and improve productivity by making the most of your XM50's capacity with this 300mm extension.

Note: Whilst it is designed to assist in you making the most of your time be sure not to fill it too full so as to reduce the effectiveness of your washer.

Biodegradable Detergent

Biodegradable Detergent for parts washers

This non-caustic, heavy duty powdered degreaser & detergent is specially formulated for use in elevated temperatures and is ideal for spin style parts washers.

It combines powerful alkaline salts, biodegradable surfactants, soil suspending agents, water softeners, corrosion inhibitors and builders to remove most oils, grease, lubricants and polishing compounds from both ferrous and non-ferrous surfaces.

Ease the burden on your waste management.

With fines of up to $1m (for corporations) and $250,000 or 7 years imprisonment (for individuals), managing how you dispose of all your trade waste has become a crucial part of your business’ operations.

As active resellers for ISS Industrial Separation Systems, you can find a complete end-to-end solution for your oil waste management. Beginning with the Vertical Gravity Separator (for oily water), we also supply water recycling systems, pits, silt traps, pumps and control panels.

The ISS Vertical Gravity Separator (VGS) for oily water, was developed to remove oil, grease and suspended solids from your parts washer waste water, designed to reduce the difficulty and number of maintenance sessions compared to conventional plate separators.

It’s able to continuously meet performance standards, handle high concentrations of oil, effectively remove suspended solids, reduce vapour content to acceptable levels and requires little floor space.

The Vertical Gravity Separator is widely used across Australia. Some of the major companies who are using it include Woolworths + Petrol (400 outlets), Shell, BP, Caltex and Toyota Australia.

Find Out More Button
ISS VGS Silt traps, pumps & control panels
Silt traps, pumps & control panels

ISS Various size Fibreglass pits ranging from 750-2000 litres
Various size pitts ranging from 750-2000 litres
ISS Vertical Gravity oily water Separator
Finance Options

Cash flow is a vital part of running a healthy small business and financing allows you to ease the pressure on cash reserves, maintaining a healthy cash flow.

Free up your staff, increase your billable hours and, most importantly, increase your revenue by financing your Prentice XM50 parts washer.

XM50 36 Month Term
Weekly payments $54.78* p/week

*Principal amount financed covers current rate of 10% GST on washer.

These figures are indicative only and are subject to change without notice.
They represent only part of the final amount and do not include establishment fee, state stamp duty and registration fee for
Personal Property Securities Register (PPSR).

Financed amounts less than $10,000 have a maximum term of 36 months.

Payments are in advance and contain nil balloon. All finance is subject to lenders credit policy and approval.
Finance provided by Mainland Finance, 94 Morgan St Wagga Wagga NSW. PH: (02) 6921 2355.

Back to Prentice

© Australasian Machinery Dealer Services Pty Ltd