The ideal parts washer for when you’re short on space but not on height.

The Prentice XM75 automatic, industrial parts washer is an ideal option for anyone struggling with space in their workshop yet require the capacity for small engines, transmissions and cylinder heads.

Coming in at 1120mm wide and 1150mm long, the XM75 is still compact enough for the smaller workshop. It does, however, reach 1990mm in height, giving it an uncommon advantage over other washers with a job height of 1300mm.

It’s designed to reduce your downtime, increase productivity and returns, while protecting your staff’s safety. The Prentice XM75:

  • Protects against heating element damage by including a low water level sensor.
  • Affords you a longer use of your solution whilst changing it less frequently by incorporating an oil skimmer.
  • Eliminates early morning starts with a programmable 7 day timer. Arrive at work with your parts washer already hot and ready to go.
  • Increases water penetration using a gear drive and a slow 4-5 rpm.  The XM75 doesn’t rob you of water pressure, to drive the turntable, like water driven models do.
  • Protects users by stopping the wash pump and turntable drive if the door is opened during the wash cycle, using a safety proximity switch fitted to the door.

Powered by a sturdy 2.2kW stainless steel pump, the XM75 delivers 250 litres of solution per minute at 240 kpa (or 35 psi) of working pressure.

Using our biodegradable, non-caustic, water soluble powdered degreaser and detergent, the XM75 heats your solution up to 85C and makes short work of dirty parts.

Could you use a more productive workshop, a greater volume of work and higher returns using the Prentice XM75?

To get a quote on the XM75, click the ‘ Make Enquiry ’ button or call Malcolm on 02 6921 2011.


Prentice XM75 Parts Washer
Plant & Industrial

Automatic Industrial Parts Washer – Prentice XM75 – open

Make an Enquiry

shadow
Prentice XM50 Automatic industrial parts washer
XM50
Prentice XM75 plant and industrial parts washer
XM75
Prentice XM125 heavy duty and industrial parts washer
XM125
Prentice XM150 extra heavy duty industrial parts washer
XM150
shadow
Matt Webster from Webster’s Dyno & Performance with his Prentice Parts WasherAnywhere Up To 50% Improvement In Productivity”

I did extensive research on spin washers before I bought my XM75. We were constrained for space and were looking for a parts washer that was upright and compact in size. Up until we bought it we had been using a hand-held jet wash which was very labour intensive and its effectiveness varied.

As the name suggest, we quickly realized it was like having an extra man in the workshop and we treat it as such. You just place the parts in the washer, turn it on and walk away. We have an item number on the system and charge it out like it’s a staff member. What’s more, it is so infinitely user friendly you could train a monkey to use it.

Not a day goes by where I don’t give myself a little pat on the back for making the decision to buy it.

- Matt Webster, Webster’s Dyno & Performance
Wodonga, VIC

Geoff Oliver from G & M Ag Repairs with his Prentice parts washerWe Easily Save Up To 3-4 Hours Of Cleaning Per Job”

We purchased our Prentice XM75 parts washer 3 years ago.

While we don’t use it all the time, the convenience it offers and the time saved, especially when we’re repairing tractors, has made it a very worthwhile investment. 

It’s given us a small increase in profitability and freed up my staff and I so we can put our hands to much better use.

- Geoff Oliver, G & M Ag Repairs,
Temora NSW

2.2kW Stainless Steel Pump

Parts Washer with 2.2kW Stainless Steel Pump

A stainless steel pump ensures you won't need to replace the pump because of rust. Pumping 250 litres per min at 38 psi working pressure.

The XM75 has been designed to make cleaning Plant & Industrial a breeze.

Stainless Steel Oil Skimmer

Stainless Steel Oil Skimmer

The stainless steel oil skimmer eases the load on your waste management system whilst increasing its longevity. Just 15 mins of use per week should suffice, twice if under a heavy workload.

7 Day Timer

Parts Washer programmable 7 day timer

Wake up each morning and ease your way into work day, knowing your programmable 7 day timer already has your parts washer heated and ready to go to work.

Come afternoon, program it to turn off 30 mins-1hr before close to ensure you're not wasting energy unnecessarily.

What about daylight saving you ask? It allows for that as well.

Gear Drive

Gear Drive for Parts Washer

Unlike water driven units, the gear drive allows the turntable to slowly rotate (4-5 rpm) which gives the dirty components high impact exposure to the heated solution (up to 80°C).

 

  • Turntable inside diameter: 740 mm
  • Job Height: 1300 mm
  • 400 kg maximum capacity
  • Heavy duty steel construction
  • Gear driven heavy-duty turntable
  • 2.2 kW Stainless steel 250L/min pump at 35 psi
  • 22 Stainless-steel fan nozzles
  • 200 Litre solution tank
  • 2 x 3.5 kW Heating elements (up to 85C)
  • Programmable 7 day timer for heater
  • Low water level sensor & alarm
  • Removable parts tree
  • Small parts tray
  • Full opening gasket-free octagonal door
  • Removable tank filter screen
  • Stainless steel oil skimmer
  • Heavy-duty rubber castors
  • 20 amp, 3 phase, 5 pin socket
  • Dimensions (mm) H:1990 x W:1120 x L:1150
XM75 parts washer side view with parts tree XM75 parts washer with parts tree

Small Parts Baskets, Tray & Tree

Small Parts Baskets, parts Tray & parts Tree for parts washer

Reduce downtime and improve productivity by making the most of your XM75's capacity with the small parts basket, tray or tree.

Small Parts Tree Dimensions:
760mm x 485mm

Small Parts Tray Dimensions:
280mm x 285mm x 75mm

Parts Basket Dimensions:

400mm x 200mm x 200mm

300mm Turntable Extension

300mm Parts Washer Turntable Extention

Reduce downtime and improve productivity by making the most of your XM75's capacity with this 300mm extension.

Note: Whilst it is designed to assist in you making the most of your time be sure not to fill it too full so as to reduce the effectiveness of your washer.

500mm Turntable Extension

500mm Parts Washer Turntable Extention

Reduce downtime and improve productivity by making the most of your XM75's capacity with this 500mm extension.

Note: Whilst it is designed to assist in you making the most of your time be sure not to fill it too full so as to reduce the effectiveness of your washer.

Biodegradable Detergent

Biodegradable Detergent for parts washers

This non-caustic, heavy duty powdered degreaser & detergent is specially formulated for use in elevated temperatures and is ideal for spin style parts washers.

It combines powerful alkaline salts, biodegradable surfactants, soil suspending agents, water softeners, corrosion inhibitors and builders to remove most oils, grease, lubricants and polishing compounds from both ferrous and non-ferrous surfaces.

Ease the burden on your waste management.

With fines of up to $1m (for corporations) and $250,000 or 7 years imprisonment (for individuals), managing how you dispose of all your trade waste has become a crucial part of your business’ operations.

As active resellers for ISS Industrial Separation Systems, you can find a complete end-to-end solution for your oil waste management. Beginning with the Vertical Gravity Separator (for oily water), we also supply water recycling systems, pits, silt traps, pumps and control panels.

The ISS Vertical Gravity Separator (VGS) for oily water, was developed to remove oil, grease and suspended solids from your parts washer waste water, designed to reduce the difficulty and number of maintenance sessions compared to conventional plate separators.

It’s able to continuously meet performance standards, handle high concentrations of oil, effectively remove suspended solids, reduce vapour content to acceptable levels and requires little floor space.

The Vertical Gravity Separator is widely used across Australia. Some of the major companies who are using it include Woolworths + Petrol (400 outlets), Shell, BP, Caltex and Toyota Australia.

Find Out More Button
ISS VGS Silt traps, pumps & control panels
Silt traps, pumps & control panels


ISS Various size Fibreglass pits ranging from 750-2000 litres
Various size pitts ranging from 750-2000 litres
ISS Vertical Gravity oily water Separator
Finance Options

Cash flow is a vital part of running a healthy small business and financing allows you to ease the pressure on cash reserves, maintaining a healthy cash flow.

Free up your staff, increase your billable hours and, most importantly, increase your revenue by financing your Prentice XM75 parts washer.

XM75 36 Month Term
Weekly payments $76.70* per week

*Principal amount financed covers current rate of 10% GST on washer.

These figures are indicative only and are subject to change without notice.
They represent only part of the final amount and do not include establishment fee, state stamp duty and registration fee for
Personal Property Securities Register (PPSR).

Financed amounts less than $10,000 have a maximum term of 36 months.

Payments are in advance and contain nil balloon. All finance is subject to lenders credit policy and approval.
Finance provided by Mainland Finance, 94 Morgan St Wagga Wagga NSW. PH: (02) 6921 2355.

 

Back to Prentice


© Australasian Machinery Dealer Services Pty Ltd